UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63922

How to add breakpoint at a line of a HDL source using Tcl commands?

Description

How to add breakpoint at a line of a HDL source using Tcl commands?

Solution

The add_bp command lets you add breakpoints to an HDL source file to pause the current simulation.

Syntax:
add_bp  [-quiet] [-verbose] <file_name> <line_number>

Example::
  The following example adds a the breakpoint to the HDL source file at the specified line number:
    add_bp C:/Data/ug937/sources/sinegen.vhd 137
 
Use "add_bp -help"  tcl command for more information on usage of this command.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58885 Xilinx Simulation Solution Center - Design Assistant - TCL Simulation Commands N/A N/A
AR# 63922
Date Created 03/15/2015
Last Updated 04/02/2015
Status Active
Type General Article
Tools
  • Vivado Design Suite