UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64005

2014.2 SDSoC - Platform list is empty

Description

I have just installed SDSoC and opened the tool.

However, when I go to create a new project, it says 'No SDSoC platforms found'

Solution

An empty platform list typically indicates an issue with licensing, the environment, or the installation.

If you open an SDSoC Terminal and execute 'sdscc -sds-pf-list', you should either see a list of platforms or a licensing error.

If your PATH variable is excessively long on Windows, it is possible that sds++ is being truncated, but because in this example you were running a previous install, the license seems like the most likely issue.

You might also see this behavior when running Linux if you do not have the xsltproc utility installed.

If this is the case, you will get the following error when running the 'sdscc -sds-pf-list' command:

couldn't execute 'xsltproc': no such file or directory (xc706_mem_hw.pfm)
couldn't execute xsltproc: no such file or directory"

AR# 64005
Date Created 03/23/2015
Last Updated 09/03/2015
Status Active
Type General Article
Tools
  • Vivado Design Suite
  • Vivado Design Suite - 2014.2