UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64165

Zynq: The GTX locations in the Users Guide do not match the GT wizard locations for my Zynq 7045 / 7035 in the FFG676 package

Description

In (UG585) V1.10, Figures 21.4 and 21.5 show the GTX locations at X0Y0 to X0Y7.

However, the GT Wizard shows the locations as X0Y8 to X0Y15.

Solution

The GT Wizard locations are correct and will route to the pins shown in the User Guide, only the XY coordinates do not match. 

The same is true for the GT common locations which are X0Y2 and X0Y3. 

This will be fixed in a future revision of (UG585).
AR# 64165
Date Created 04/03/2015
Last Updated 04/17/2015
Status Active
Type General Article
Devices
  • Zynq-7000
  • XA Zynq-7000
  • Zynq-7000Q