We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64268

2015.1 UltraScale Partial Reconfiguration - L shape pblock containing I/Os is not displayed correctly in Graphical User Interface (GUI)


There is an L shape pblock in the Reconfigurable Partition (RP) in my partial reconfiguration design.

The pblock contains the whole bank of I/Os, but in the GUI, only a half bank of I/Os are shown in the pblock.


Is this a display issue only?


This is a display issue only and is fixed in Vivado 2015.3.
In reality, in both the GRID_RANGES and DERIVED_RANGES of the L shaped pblock, the whole bank of I/Os are selected properly.

AR# 64268
Date Created 04/15/2015
Last Updated 04/30/2015
Status Active
Type General Article
  • Vivado Design Suite - 2015.1