We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64270

2014.3 UltraScale Partial Reconfiguration - Failure to set per-frame CRC property before write_bitstream


I have a partial reconfiguration design targeting an UltraScale device.

I intend to set the per-frame CRC property before generating the bitstream with the following command:

set_property bitstream.general.perframecrc yes [current_design]

However, it fails with the following error message:

ERROR: [Netlist 29-177] Cannot set property 'bitstream.general.perframecrc' because the property does not exist.
Resolution: Create this property using create_property command before setting it.

When will the per-frame CRC option be added in the bitstream properties for UltraScale devices?


This issue is fixed in Vivado 2015.3.
AR# 64270
Date 08/28/2015
Status Archive
Type General Article
  • Vivado Design Suite - 2014.3
Page Bookmarked