We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64334

AXI Chip2Chip v4.2 - How do I use the axi_c2c_m2s_intr_* and axi_c2c_s2m_intr_* signals?


AXI Chip2Chip has the following signals, but I cannot find any descriptions for them.
How do I use these signals?
  •   axi_c2c_m2s_intr_in (input),
  •   axi_c2c_s2m_intr_out (output),
  •   axi_c2c_s2m_intr_in (input),
  •   axi_c2c_m2s_intr_out (output),


These signals can be used as interrupt signals from the Master device to the Slave device, or from the Slave device to the Master device.

From Master device to Slave device:
axi_c2c_m2s_intr_in (input) --> Serial I/F --> axi_c2c_m2s_intr_out (output)

From Slave device to Master device:
axi_c2c_s2m_intr_in (input) --> Serial I/F --> axi_c2c_s2m_intr_out (output)

AR# 64334
Date Created 04/21/2015
Last Updated 05/18/2015
Status Active
Type General Article
  • AXI Chip2Chip