We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64335

2014.4.4 - Vivado UltraScale Partial Reconfiguration - Can I persist the config port when SYSMON is used in reconfigurable module


When SYSMON (AMS tile) is used in reconfigurable module, can I persist the config port by setting the BITSTREAM.CONFIG.PERSIST property?


When SYSMON (AMS tile) is used in reconfigurable module, the BITSTREAM.CONFIG.PERSIST property can only be set to "NO".

If this violation is detected, the following DRC HDPR-52 will be reported:

ERROR: [Drc 23-20] Rule violation (HDPR-52) The persistent config port, controlled by BITSTREAM.CONFIG.PERSIST, is not supported when primitive cell '<NETLIST_ELEMENT>' is being reconfigured.

AR# 64335
Date Created 04/21/2015
Last Updated 05/27/2015
Status Active
Type General Article
  • Vivado Design Suite