UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64431

UltraScale/UltraScale+ Memory IP - [Xicom 50-38] xicom: Invalid memory type value detected from MIG core: 0

Description

Version Found: v6.1

Version Resolved: See (Xilinx Answer 58435)

When I attempt to open the Vivado Hardware Manager and connect to the MIG UltraScale HW_MIG XSDB module, I see the following error messages:

[Xicom 50-38] xicom: Invalid memory type value detected from MIG core: 0.
[Xicom 50-38] xicom: Data structures not initialized for CseXsdb slave Device:0, user chain number/bus:1, slave index:0.
[Labtools 27-1829] vcse_server failed during internal command 'CseXsdb_getRegistersAndParameters'. See previous error messages.

Why can the Hardware Manager not detect any MIG cores?

Solution

This is a known issue with the Vivado Hardware Manager that has been fixed in Vivado 2015.1.

Please upgrade to Vivado 2015.1 and MIG UltraScale v7.0 if the XSDB module is required.

Revision History:

05/01/2015 - Initial Release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58435 UltraScale/UltraScale+ Memory IP - Master Release Notes and Known Issues N/A N/A
AR# 64431
Date 01/12/2018
Status Active
Type Known Issues
Devices
  • Kintex UltraScale
  • Virtex UltraScale
  • Kintex UltraScale+
  • More
  • Virtex UltraScale+
  • Zynq UltraScale+ MPSoC
  • Less
Tools
  • Vivado Design Suite
  • Vivado Design Suite - 2014.4
IP
  • MIG UltraScale
Page Bookmarked