We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6444

Schematic Editor - "Library error: cannot read model info" is reported when I generate a schematic from a netlist


Keywords: schematic, netlist, library, error, net2sc

Urgency: Standard

General Description:
When I execute "Generate Schematic from Netlist" from within Foundation Schematic Editor, the following error is reported:

"Library error: cannot read model info ."


The "net2sc" utility can only generate schematics from netlist files.

For example, if instantiated components are coming from LogiBLOX, no netlist is associated with the component. (In LogiBLOX, an .ngc file is written out rather than a netlist). In this case, the schematic creation will fail.
AR# 6444
Date Created 05/10/1999
Last Updated 08/12/2003
Status Archive
Type General Article