We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64897

2015.1/2015.2 - Vivado Device Programmer - No Configuration memory devices appear when I target the KU035 device? How do I get cfgmem devices to appear in the GUI?


In the 2015.1 and 2015.2 versions of Vivado when I target the KU035 device and want to attach a configuration memory device, there are no configuration memory devices listed.

How do I get memories to appear?



Attached to this Answer Record is a CSV file that will populate the cfg_mem parts list when a KU035 device is targeted.

Please copy this CSV file and replace the file of the same name in your C:/Xilinx/Vivado/2015.2/data/xicom directory.

This CSV file will not be needed after the 2015.3 release of Vivado as the cfg_mem parts table will be updated for that release.


Associated Attachments

Name File Size File Type
xicom_cfgmem_part_table.csv 38 KB CSV
AR# 64897
Date 07/07/2015
Status Active
Type General Article
  • Vivado Design Suite - 2015.1
  • Vivado Design Suite - 2015.2
Page Bookmarked