We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64968

IBERT: How to open a .csv file and view the 2D eye after saving it in IBERT


Vivado IBERT tool has a feature to save a scan's 2D eye plot as a .csv file.

Is there any command to open this .csv file and view the 2D eye again after closing the Vivado project.


You can use the following command in this case:

display_hw_sio_scan [read_hw_sio_scan Scan_0.csv]
AR# 64968
Date Created 07/14/2015
Last Updated 09/11/2015
Status Active
Type General Article
  • Kintex-7