We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65352

2015.3 AXI to APB bridge: Ports described in product guide do not match the ports when used in a IPI design


When the APB bridge GUI is opened from IP Catalog or IPI, it shows Individual interfaces for each APB slave.

This is not in line with the port map given in the Product Guide.


This IP symbol behavior is provided to give logical mapping of all of the slave interfaces.

Some common signals are shown in all of the interfaces. This helps with differentiating/identifying individual slaves.

AR# 65352
Date Created 09/08/2015
Last Updated 10/06/2015
Status Active
Type General Article
  • Vivado Design Suite
  • AXI TO APB bridge