We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65548

MIG 7 Series - Customization causes segmentation violation in Windows 7


Version Found: MIG 7 Series v2.2

Version Resolved: See (Xilinx Answer 54025)

In Vivado 2015.2.1 or 2014.3.1, When I open MIG and run customization from the IP Catalog, I receive the following error:

Failed to generate IP 'mig_7series_0'. Failed to generate 'Custom UI' outputs.

How can this be avoided?


This failure can be caused by the PATH/Path Windows environment variable.

For example, if you have all of the required Vivado paths, but also have the following path appended to the end of the path variable, this can cause the segmentation failure error:


To work around this, remove the above string from the path environmental variable.

See (Xilinx Answer 11630) for help in changing the environment variable.

This issue is currently under investigation.

Revision History

10/27/2014 - Initial Release

AR# 65548
Date Created 10/02/2015
Last Updated 10/28/2015
Status Active
Type Known Issues
  • Vivado Design Suite
  • MIG 7 Series