We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65742

2015.3 FSBL compilation error with IAR toolchain


In the Vivado 2015.3 release, enhancements have been made to the standalone library Makefiles which include changes in the Makefile for the XilFFs library.

However, these enhancements have created compilation issues with the IAR compiler.

Because the XilFFs library is used in FSBL, In Vivado 2015.3 you cannot compile FSBL with the IAR toolchain.


If you are using the 2015.3 SDK with IAR, you will need to use the attached Makefile instead of the Makefile in the 2015.3 installation.

Replace the file in the following location:

(<installed directory>\2015.3\SDK\2015.3\data\embeddedsw\lib\sw_services\xilffs_v3_1\src\Makefile).

This issue is resolved in Vivado 2015.4.


Associated Attachments

Name File Size File Type
Makefile 2 KB NA
AR# 65742
Date Created 10/19/2015
Last Updated 10/28/2015
Status Active
Type General Article
  • Zynq-7000
  • Vivado Design Suite - 2015.3