UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6637

WebPACK 3.2 - "EXEWRAP detected a return code of '2' from program c:\webpack\xilperl.exe"

Description

Keywords: WebPACK, EXEWRAP, xilperl, exit, code, 0002

Urgency: Standard

General Description:
When I attempt to implement a design in WebPACK, the following error message
is displayed:

Starting: 'c:\xilinx_webpack\bin\nt\xilperl.exe @5600.rsp '

Can't open Perl script "@5600.rsp": No such file or directory

EXEWRAP detected a return code of '2' from program
'c:\xilinx_webpack\bin\nt\xilperl.exe'

Done: failed with exit code: 0002.

Solution

Long path names can often cause these problems. This is dependent
upon the operating system, and is most often seen on Windows 98. To
avoid the problem, shorten the path in which the design is located.

Example:
change path from
C:\designs\mitchell\coolrunner\test2\version2\revision1\lego.npl
to
C:\designs\rev1\lego.npl
AR# 6637
Date Created 08/31/2007
Last Updated 10/05/2008
Status Archive
Type General Article