UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 66371

LogiCore DisplayPort v6.1 (Rev. 1) - When Enabling "Additional Transceiver Control and Status Ports", if I close the GUI and re-open it, this option is un-checked

Description

I have enabled the "Additional Transceiver Control and Status Ports" option in the 2015.4 GUI.

If I close the GUI and then open it again, I see that this check box is unchecked in the GUI, although the actual block diagram shows these ports.

What is the reason for this and how can I fix it?

Solution

This is a known issue in the Vivado 2015.4 DisplayPort v6.1 (Rev. 1) GUI.

This issue is resolved in Vivado 2016.1.

Please see (Xilinx Answer 66301) for a patch for the DisplayPort v6.1 (Rev. 1) in Vivado 2015.4.

Linked Answer Records

Master Answer Records

AR# 66371
Date Created 01/11/2016
Last Updated 01/20/2016
Status Active
Type General Article
Devices
  • Kintex-7
Tools
  • Vivado Design Suite - 2015.4
IP
  • DisplayPort