UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6639

2.1i ChipViewer - The input path is not shown when you click on a input pin in the ChipViewer

Description

Keywords: Chip, Viewer, 2.1i, input, output, pin, path

Urgency: Standard

General Description:
The input path is not shown when you click on a input pin in ChipViewer.

Solution

When you click once on an output pin, the path from a function block producing that
output to the pin is shown. When you do this for an input pin, the paths to the
function blocks where that input is used are not shown, but should be.

This is fixed in the latest service pack available at:
http://support.xilinx.com/support/techsup/sw_updates/
AR# 6639
Date Created 05/27/1999
Last Updated 08/27/2001
Status Archive
Type General Article