UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 66572

2015.4 - Vivado IP Integrator - External interrupts are not showing up in the BSP xparameter.h file

Description

I have created a simple Zynq design using Vivado IP Integrator, and have connected the IRQ interrupt externally via the concat IP.

However, when I build the BSP and open the xparameters.h file, I can see that the external ports are missing.

How can I address this?

Solution

The port type of the external ports needs to be set to Interrupt. To do this, right click anywhere on the IPI canvas and select "Create Port".

Make sure that the Port Type is set to Interrupt in the Create Port GUI:

AR# 66572
Date Created 02/09/2016
Last Updated 02/12/2016
Status Active
Type General Article
Devices
  • Zynq UltraScale+ MPSoC
  • Zynq-7000