We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 66858

Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit - HDMI equalizer requirement for 16nm


Is characterization for HDMI equalization available for Zynq UltraScale+ yet? What is the recommendation for HDMI equalization with Zynq UltraScale+?


For 7 Series GTX and UltraScale GTH devices, the current recommendation does not include external TMDS equalization or repeater chips.

The recommendation for those architectures is to use passive TMDS emulation circuitry as recommended in TB-FMCH-HDMI4K.

While we expect similar performance with Zynq UltraScale+ MPSoC GTH, characterization is pending. Until further notice, the recommendation is to use an external TMDS equalizer or repeater chips on the receiver interface.

Examples of external TMDS equalizers are (but are not limited to) TMDS181 from Texas Instruments and PS8409 from Parade Technologies.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
66752 Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 66858
Date Created 03/21/2016
Last Updated 04/04/2016
Status Active
Type General Article
Boards & Kits
  • Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit