UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 671

Error cl192 or cl126 while converting a PALASM (PDS) file

Description

PALCONVT may issue one of the following errors while translating a
PALASM (.PDS) file:

cl192:[Error]Pin '<signal_name>' is not declared as an output pin !

cl126:[Error]The equation input '<signal_name>' is not declared !

Solution

PALCONVT only supports PALASM v2.2 and earlier syntax.

Remove any PALASM v2.3 or later syntax from the PDS file. For example,
parentheses are not part of PALASM v2.2 or earlier.

A partial listing of unsupported PALASM syntax can be found in the
XEPLD Reference Guide, near the end of the "PLUSASM Command
Reference" chapter.
AR# 671
Date Created 08/31/2007
Last Updated 10/01/2008
Status Archive
Type General Article