We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67155

How to handle TXPIPPMEN in GTY and GTH UltraScale HSSIO


In both (UG576) and (UG578), the port TXPIPPMEN is declared to be Asynchronous.

How should I handle this signal?


This signal is re-synchronized internally, however it is still recommended that TXPIPPMEN be treated as a synchronous signal on the TXUSRCLK domain.

TXPIPPMEN should be pulsed for two TXUSRCLK cycles in order to move TXPIPPMSTEPSIZE[3:0] of the PI controller in the direction of TXPIPPMSTEPSIZE[4].

AR# 67155
Date 05/12/2016
Status Active
Type General Article
  • Kintex UltraScale
  • Kintex UltraScale+
  • Virtex UltraScale
  • Virtex UltraScale+
Page Bookmarked