UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67229

Generating a GTH core using UltraScale FPGA Transceivers wizard (1.6)(rev2) will produce error / critical warning messages (for the first time).

Description

Generating a GTH core using UltraScale FPGA Transceivers wizard (1.6)(rev2) will produce error / critical warning messages (for the first time).

There are no issues with the XCI and RTL results.

Solution

Please note that this is a GUI error only, there are no issues with the XCI and RTL file results.

The issue with the Wizard GUI will be fixed in a future release.

Solution:

  1. Reopen the XCI & re-generate the GTH core, then confirm that wizard has no error/critical warnings generated before using it in the design.
  2. Confirm that GT reference clock is placed in the intended location. See (Xilinx Answer 67228)
AR# 67229
Date Created 05/16/2016
Last Updated 05/24/2016
Status Active
Type General Article
Devices
  • Kintex UltraScale
  • Virtex UltraScale
Tools
  • Vivado Design Suite - 2016.1
IP
  • UltraScale FPGA Transceiver Wizard