UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67517

Packaging - What is the part orientation for Tape and Reeled devices?

Description

What is the part orientation for Tape and Reeled Xilinx devices?

Solution

For tape and reeled devices, pin #1 for PC and PQ packages is towards the round sprocket hole side of the tape.

The figure below shows the part orientation for PC / PQ / BGA / FG and SBGA packages:



 

Xilinx tape and reel specifications are in compliance with the EIA-481-C Standard.

AR# 67517
Date Created 07/12/2016
Last Updated 08/11/2016
Status Active
Type General Article
Devices
  • Artix-7
  • Kintex UltraScale
  • Kintex UltraScale+
  • More
  • Kintex-7
  • Spartan-3A
  • Virtex-5
  • Virtex-4
  • Virtex UltraScale+
  • Virtex UltraScale
  • Spartan-6
  • Spartan-3E
  • Spartan-3AN
  • Virtex-7
  • Virtex-6
  • CPLD Device Families
  • Less