We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67787

2015.4 Vivado - Bitstream tcl.post setting is dropped when implementation settings are changed


In Vivado 2015.4, a Tcl file sourced in the tcl.post setting of bitstream settings is dropped when implementation settings are changed.


This issue was resolved in Vivado 2016.1.

To work around this issue in Vivado 2015.4, the Bitstream Tcl post script location will need to be re-entered when the Implementation settings are changed.

  1. Run the following command in the Tcl console:
    set_property STEPS.WRITE_BITSTREAM.TCL.POST {<location_of_tcl_script>/post.tcl} [get_runs impl_1]
  2. Set the tcl.post to the Tcl script location in the bitstream settings window again.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
63954 2015 Vivado - Vivado User Interface (GUI) and Project Management Known Issues N/A N/A
AR# 67787
Date 09/26/2016
Status Active
Type Known Issues
  • Artix-7
  • Kintex-7
  • Kintex UltraScale+
  • More
  • Kintex UltraScale
  • Virtex UltraScale
  • Virtex UltraScale+
  • Virtex-7
  • Virtex-7Q
  • SoC
  • Less
  • Vivado Design Suite - 2015.4
  • Vivado Design Suite - 2015.4.1
  • Vivado Design Suite - 2015.4.2
Page Bookmarked