We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67828

Zynq UltraScale+ MPSoC: Linux SPI interrupts mapping


The Zynq UltraScale+ Technical Reference Manual (UG1085) documents the SPI values in Table 11-3 with the following note:

"The SPI index is mapped to the GIC interrupt ID# as: GIC-SPI[N] = ID# (N+32)".


In Linux, the .dtsi contains the actual interrupt id, and the internal driver/core will take care of the required arithmetics.

Note: Stand-alone will follow the above formula and update the interrupt id accordingly.

AR# 67828
Date 09/13/2016
Status Active
Type General Article
  • Zynq UltraScale+ MPSoC
Page Bookmarked