UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 69916

2017.3 Install - Attempting to reuse an install download for a second install fails with "At least one device must be selected." message when SoCs / Zynq-7000 is the only selection

Description

I have run webinstaller and installed WebPACK with SoC devices only using the "Download & Install" option.

Now, I would like to use the downloaded files from this install to install the same configuration on other computers. To do this I run the xsetup from the download of the previous installation.

When I get to the device selection page, the Vivado installer GUI will not proceed. It displays a message saying "At least one device must be selected".

The Device selection window shows the Zynq-7000 selected and the SoCs partially selected, but Production Devices appear to be unselected.

If I select additional devices in the initial install, I do not see this problem. However, I would prefer not to use the additional space needed to install extra devices.

Solution

There are two ways to work around this issue.

  • Instead of doing an initial install, use the Download only option and then use the downloaded files to complete multiple installs.
  • Use the batch installer. Below is an example command line:
C:\intall1\downloads\Vivado_2017.3\bin\xsetup.bat -a "XilinxEULA,3rdPartyEULA,WebTalkTerms" -b Install -e Vivado HL WebPACK" -l H:\eda\install2
AR# 69916
Date 10/06/2017
Status Active
Type General Article
Tools
  • Vivado Design Suite - 2017.3
  • Vivado Design Suite - 2017.2
Page Bookmarked