We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 700

6.0: About "Problem inv.PROCapture...Leave PSFM"


PROflow quits with the uninformative message: "Problem
inv.PROCapture...Leave PSFM"

CAUSE: There is not enough Conventional Memory to run PROflow.


Increase the Conventional Memory by loading high and
removing unnecessary drivers and TSRs. You should have at least 450k (as
seen from a DOS box from Windows) to avoid any problems. Use a memory
manager like QEMM or maXmem (on the BBS under XMEM.ZIP) to free up low
AR# 700
Date Created 12/04/1995
Last Updated 03/11/1999
Status Archive
Type General Article