We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7354

3.1i Timing Analyzer - Virtex-II - Advaned Analysis coverage is different than expected for SRLC16.


keywords: advanced, analysis, SRLC16, coverage

General Description:

During Advanced Analysis, the percent coverage is

different than expected for SRLC16.

Also See (Xilinx Solution 6321) & (Xilinx Solutoin 2963)


The shift registers are being packed correctly into

both LUTs of the Slices. The real problem is that

the speed files are missing setup/hold times from

the Address to the Clock. Normally there is no

setup time for the Address lines, since they are

considered a data path. In this case, there

should be setup/hold times available.

This issue will be address in a future release.

AR# 7354
Date Created 08/31/2007
Last Updated 01/18/2010
Status Archive
Type General Article