We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7700

2.1i ngdanno warning : ngdexpander : 5 - STARTUP symbol... can be ignored


Keywords : ngdanno, STARTUP, ngdexpander, 5

Urgency : Standard

General Description : The back annotation program, ngdanno, produces the following
warning when the STARTUP or STARTUP_VIRTEX block is used in a design :
"Warning : NgdExapnder : 5 - the STARTUP symbol '$I304': The following pins were
connected on the outside of block '$I304' but left unconnected within the block: CLK"


This warning is safe to ignore. Ngdanno does not simulate the CLK input to STARTUP,
so the warning has no real meaning. The warning will be eliminated in a future software
AR# 7700
Date Created 09/17/1999
Last Updated 12/10/2001
Status Archive
Type General Article