We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 796

Obsolete - Hardware Debugger - Xchecker issue


Keywords: xchecker, hardware debugger, readback

Urgency: Standard

General Description:
Hardware Debugger 6.0 has two symptoms that can have the same solution:

1. Hardware Debugger 6.0 cannot find the XChecker cable
2.Readback only works once from Hardware Debuger 6.0; Consecutive attempts to readback report all '1's'.


These symptoms are caused by intermittent serial port communications failures. In the Hardware Debugger, use the Cable -> Communications pop-up to set the baud rate to another value.
AR# 796
Date Created 08/31/2007
Last Updated 09/26/2005
Status Archive