We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 826

Hardware Debugger 6.0.1: The Cable command Logic Level of Pins is not a continuous probe.


The Logic Level of Pins command probes the cable pins and then displays
the values. If the logic levels change, the dialog that displays the values
will not be updated.


To re-probe the cable pins, re-select the Logic Level of Pins command
from the Cable menu.
AR# 826
Date Created 02/27/1996
Last Updated 11/10/2004
Status Archive
Type General Article