We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 829

Hardware Debugger 6.0.1: A group cannot be modified using the Signal Groups dialog.


Once a group is added to the display list using the Display Signals dialog,
signals cannot be added to it or removed from it.


To modify a group, remove it from the display list by removing it from
the Displayed Signals list box in the Display Signals dialog. The Display
Signals dialog can be opened by clicking on Display in the Control Panel, or
by selecting the Settings->Display Signals command from the Debug menu.
Once the group is nolonger a member of the display list, use the Signal
Groups dialog to add or remove signals. When the desired signals have been
added or removed, add the group back to the display list using the Display
Signals dialog.
AR# 829
Date Created 02/27/1996
Last Updated 11/10/2004
Status Archive
Type General Article