UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8538

2.1i_SP3 JTAGProgrammer: 9500/XL Deselecting Program Options -> "Erase before programming" does not work

Description

Keywords: Jtagprogrammer, jtagpgmr, 9500, 9500XL, erase, program, deselect, GUI, service pack,
SP3, SP4, SP5

Urgency: HOT

General Description: The Service Pack 3 introduced a problem with the deselection
of "erase before programming" in the chain operations menu on certain platforms.
This is a problem for production environments which are programming new parts
and do not want to erase the parts before programming.

Solution

This is fixed in Service Pack 6 (Cs6).

Please go to the link where the latest Service Pack is available:
http://www.xilinx.com/support/techsup/sw_updates/
AR# 8538
Date Created 02/02/2000
Last Updated 08/27/2001
Status Archive
Type General Article