We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 855

Hardware Debugger 6.0.1: Only 3 characters show when displaying # of clocks applied before first snapshot


When performing a readback of a device and applying clocks before the first
snapshot, only 3 characters will be displayed. For example, if you apply
1000 clocks before the first snapshot, the number "000" will be displayed
instead of "1000".


Perform a readback before the clocks are applied. This will make the first
snapshot the second snapshot and the number of clocks will be displayed
AR# 855
Date Created 02/27/1996
Last Updated 11/10/2004
Status Archive
Type General Article