We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8598

4.1i FPGA Editor - When Block Editor is used, are the "Feqn" and "Geqn" equations case-sensitive?


Keywords: FPGA Editor, Feqn, Geqn, case, sensitive, Block Editor, 3.1i

Urgency: Standard

General Description:
I am trying to modify the equations for Feqn or Geqn with Block Editor -- are the equations are case-sensitive?


The equations for Feqn and Geqn are not case-sensitive; the equations are based upon a letter/number combination. Depending on the device family, the letter can either be F, G, H, or A, and the number can either be 1, 2, 3, or 4.

Use the corresponding letter/number value for the following families:


Feqn -> F1...F4
Geqn -> G1...G4
Heqn -> H1...H4


Feqn -> A1...A4
Geqn -> A1...A4

This issue will be addressed in a future software release.
AR# 8598
Date Created 02/11/2000
Last Updated 10/08/2003
Status Archive
Type General Article