UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8823

3.1i COREGEN - Some XCO parameter settings may not be loaded into the core customization GUI when launching an XCO

Description


Urgency: standard



General Description:

Some XCO parameter settings may not be loaded into the core

customization GUI that comes up when you double-click on an XCO file

in the Xilinx Project Navigator (many remain at their default

settings).



If you do not notice that this is happening, you may end up generating

a core which does not support all of the features originallyin specified

in the input XCO file.

Solution


This is a known problem which will be fixed in a future IP update.



In the meantime, as a workaround, you may want to manually make a

backup copy of your XCO file before double-clicking on the XCO to l

aunch it from the Project Navigator. When the customization GUI comes up,

carefully review all of the GUI settings and manually re-set any that

were not configured properly during the launch process before generating

the core.



As an additional check, you can visually compare the backup XCO file

settings to the settings of the new XCO that is created when the core

is generated.
AR# 8823
Date Created 08/31/2007
Last Updated 07/13/2011
Status Archive
Type General Article