We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8937

3.1i Virtex PAR- PAR hangs during PWR/GND routing.


Keywords: Virtex, par, hangs, long time, PWR/GND,

Urgency: hot

General Description
A case has been seen where PAR hangs during PWR/GND routing.
This was found to occur when a PWR/GND net has to "shove" itself
in order to open up a routing resource. This is most likely to occur on
dense designs with very large PWR/GND nets.


This change is available in the latest 3.1i Service Pack available at:

AR# 8937
Date Created 08/31/2007
Last Updated 10/21/2008
Status Archive
Type General Article