We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8943

WorkView Office - PowerView 6.1 fails to create a VSM netlist using a Virtex-II library


Keywords: WorkView office, Virtex-II, VSM netlist, wir, library

Urgency: Standard

General Description:
When I generate a simulation netlist using Viewlogic's ViewSim VSM (PowerView 6.1) netlister on a design that contains flip-flop or latch primitives, the following error is reported:

"Error: viewbase: Error 338: Undefined variable(s) encountered (FLOATVAL=@INIT). Occurred on net instance <instance_name>."


This was a known problem in PowerView that was fixed in eProduct Designer (the newest version of the software). Please use the new eProduct Designer software to avoid this error.
AR# 8943
Date Created 08/31/2007
Last Updated 05/04/2006
Status Archive