We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 895

XBLXGS 5.x fails on Solaris with "crt1:bad open" or "libbase: can't open file"


Keywords: XBLOX, xblxgs, solaris, fails, error

Urgency: Standard

General Description:

XBLXGS will halt with an error similar to the following if run on a Solaris

(Solaris 2.4)
crt1:bad [02] open: /tools/mentor/lib/mgc_ld.so
Abort - core dumped

(Solaris 2.5)
ld.so.1: (unknown): fatal: libbase_lib.so.14.0: can't open file: errno=2

This is because XBLXGS was compiled native to SunOS.


A Solaris-native version of XBLXGS does not currently exist. There is no
fix available at this time.

Since XBLXGS is part of the XBLOX simulation flow, you can work around the
problem by redrawing your schematic without XBLOX modules.
AR# 895
Date Created 08/31/2007
Last Updated 10/01/2008
Status Archive
Type General Article