We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9127

6.1i ISE - When I select Project -> New Source, the CORE Generator module name must be reentered


Keywords: CORE Generator, COREGen, CORE, New Source, Project Navigator, Proj Nav, module, IP

Urgency: Standard

General Description:
When I select Project -> New Source...COREGen IP, I must enter a file name before starting CORE Generator. However, this name is not utilized and must be reentered once the core has been selected.


This is the correct process. Only the name entered in CORE Generator will be used. CORE Generator must establish the core type before it can accept a name for the core.

In ISE 7.1i, the core name is correctly passed on to CORE Generator.
AR# 9127
Date Created 04/24/2000
Last Updated 03/19/2006
Status Archive
Type General Article