We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9338

3.1i MODULAR PAR - ERROR:Portability:3 - This Xilinx application has run out of memory


Keywords: modular, design, assembly, assemble, module, mode

Urgency: Hot

General Description:
PAR is running out of memory during the assembly phase of a V2000E design.

It gives the following error message after loading the design and the
v2000e.nph device information:

ERROR:Portability:3 - This Xilinx application has run out of memory or has
encountered a memory conflict. Memory problems may require a simple increase
in available system memory, or possibly a fix to the software or a special
workaround. To troubleshoot or remedy the problem, first: Try increasing
your system's RAM. Alternatively, you may try increasing your system's
virtual memory or swap space. If this does not fix the problem, please try
the following: Search the Answers Database at support.xilinx.com to locate
information on this error message. If neither of the above resources
produces an available solution, please use Web Support to open a case with
Xilinx Technical Support off of support.xilinx.com. As it is likely that
this may be an unforeseen problem, please be prepared to submit relevant
design files if necessary.


This problem is fixed in the latest 3.1i Service Pack available at:
http://support.xilinx.com/support/techsup/sw_updates. The first
service pack containing the fix is 3.1i Service Pack 3.
AR# 9338
Date Created 05/22/2000
Last Updated 08/19/2002
Status Archive
Type General Article