We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9606

3.1i Design Manager - Post Layout Timing Report should not be automatically generated after executing MPPR


Keywords: design manager, post layout timing report, MPPR, trce,

Urgency: HOT

General Description:

A "Post Layout Timing Report" is generated and displayed in the report browser
for all MPPR revisions executed, however the report does not correspond to
the PAR-generated <design>.ncd file from that revision.


The TRCE program is not automatically run after MPPR, and as such, this report
should not be generated by default. The Post Layout Timing Report should be
ignored in this scenario. A new one can be generated by doing the following:

*Select the appropriate revision (i.e. - rev1p1_rev_1_1_2)
*Select Tools->Flow Engine
*From within Flow Engine, select Utilities->Produce Timing Report

A Post Layout Timing Report will now be generated for you.

This change is available in the latest 3.1i Service Pack available at:
AR# 9606
Date Created 06/29/2000
Last Updated 07/31/2002
Status Archive
Type General Article