UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9857

3.1i Foundation ISE - "Enable Verilog Preprocessor" property does not work properly

Description

Keywords: Project Navigator, Express, ISE, verilog, preprocessor

Urgency: Standard

General Description:
The FPGA Express synthesis property "Enable Verilog Preprocessor"
is not working properly from within Project Navigator. Once the switch
has been selected, the Preprocessor is always on. Deselecting the
switch has no effect.

Solution

The design needs to run using stand-alone Express.
AR# 9857
Date Created 08/07/2000
Last Updated 12/25/2002
Status Archive
Type General Article