Flash Memory Programmer dialog box

You can use the Flash Memory Programmer dialog box to program the parallel flash memory in the system.

The Flash Memory Programmer dialog box contains the following items:

Name Function

File to Program In this field, specify the name of the file to write to the Flash memory.

Automatically convert file... Select this check box to have SDK automatically convert the file to the selected bootloadable format when programming Flash.

Flash Memory Select the Flash Memory and Offset to Program.

Instance Name
Select the Flash memory to program.

Address, Size & Bus Width
Properties of the Flash Memory selected to program.

Program at Offset
Offset from the Flash Base address, where the file should be programmed.

Scratch Memory Specify the memory to use as scratch memory.

Create Flash Bootloader Application Select this check box to view options for specifying parameters for the bootloader application.

Software Platform
Select from the list of software platform for the processor in the workspace.

SW Application Project
Name of the project in the workspace.

Bootloader File Format
Displays the format of the bootloader file.

Name	Function
File to Program	In this field, specify the name of the file to write to the Flash memory.
Automatically convert file...	Select this check box to have SDK automatically convert the file to the selected bootloadable format when programming Flash.
Flash Memory	Select the Flash Memory and Offset to Program.
Instance Name	Select the Flash memory to program.
Address, Size & Bus Width	Properties of the Flash Memory selected to program.
Program at Offset	Offset from the Flash Base address, where the file should be programmed.
Scratch Memory	Specify the memory to use as scratch memory.
Create Flash Bootloader Application	Select this check box to view options for specifying parameters for the bootloader application.
Software Platform	Select from the list of software platform for the processor in the workspace.
SW Application Project	Name of the project in the workspace.
Bootloader File Format	Displays the format of the bootloader file.

JTAG settings

Configure the JTAG settings
Programming parallel Flash memory

Configure JTAG Settings dialog box