Specifying Profiler configuration

1. In the C/C++ Projects view, select a project.
2. Select Run > Run.
3. In the Configurations box, expand Xilinx C/C++ ELF.
4. Select a run configuration.
5. Click the Profiler tab.
   
   
   
   
6. Do the following:
• Click to select the Enable Profiling check box.
• Click to select the Show Profile Results Immediately check box.
• In the Profiling Parameters for Hardware Targets area, specify the histogram sampling frequency and bin size, and the scratch memory to use for profiling.
7. Click Run to profile the application

Copyright © 1995-2009 Xilinx, Inc. All rights reserved.