Specifying XMD target configuration

To configure the XMD Target options, do the following:

In the Connection Type drop-down list, choose to execute the application on the hardware, Simulator, or XMDStub (MicroBlaze only) target.
Click Advanced Options to view the advanced configuration options you can provide for each communication target type:

To specify the Read-Only Memory address range, type the start address in the Addr box and size of the memory (in bytes) in the Size in Bytes box.
To specify the Memory Mapping for PowerPC resources for a PowerPC target, specify the start addresses in the I-Cache Addr, D-Cache Addr, I-Tag Addr, D-Tag Addr, DCR addr, and TLB Addr boxes. The ISOCM addresses for PowerPC 405 is automatically inferred for the system.
To specify the Configuration File for a PowerPC simulator target, specify the configuration file in the PowerPC Simulator Config File box.
To specify the XMDStub options for MicroBlaze XMDStub targets:

To select the mode of communication select either Use JTAG or Use Serial.
For Serial Communication, specify the serial port to use on the host machine and the baud rate of the serial communication.
For JTAG Communication, the options are inferred from Configure JTAG Settings dialog box.