ISE
Opening and Navigating the Design Summary
Note If you do not want the Design Summary to
appear in the Workspace when you open a project, deselect Open Design Summary/Reports when project is opened in
the ISE® General page of the Preferences dialog box. 
To Open the Design Summary
From Project Navigator,
you can open the Design Summary using any of the following methods:
- Select Project > Design Summary/Reports
- In the Project Manager toolbar, click the Design Summary/Reports
toolbar button
. - In the Design
panel, select the top module
in the Hierarchy pane,
and double-click Design Summary/Reports in
the Processes pane.
If you are working with command line tools, you can access
the Design Summary through the XReport program using any of the
following methods:
- At the command line, type xreport. In XReport, select File > Open, and browse to the .ise file for your project.
- At the command line, type xreport -ise project_file.ise
Note If you do not have a .ise file, select File
> New Project to create one. When you run command line
tools, you must use the -ise option and specify
the .ise project file you created. Following is an example, using
MAP command line commands: map -ise project_file.ise ... For more information, see Using Message
Filters from the Command Line.
To Navigate in the Design Summary
Use the following Design Summary toolbar buttons to navigate to previously
viewed reports and files:
- Go Back
- Go Forward
