The Console, Errors, and Warnings panels in the Transcript window
display a log of all project activity. Each panel shows different
information as follows:
- Console panel - Shows processing information
from each process, including error and warning messages generated
by the synthesis and implementation tools.
- Errors panel - Shows only error messages,
which indicate that a process did not complete successfully.
- Warnings panel - Shows only warning messages,
which indicate that a problem was detected in the process or design,
but the process successfully created the necessary output files.
Note The Transcript window automatically scrolls output messages
as processes run. If you manually scroll to read the messages, auto-scrolling
stops. To resume auto-scrolling, press Ctrl+End.
To Customize Display Settings
- Select Edit > Preferences.
- In the Preferences dialog box, click the Console category.
- In the Console page, change the settings as needed.
To Clear Text
Caution! Clearing
text cannot be undone.
- Click the Console, Errors, or Warnings panel.
- Right-click the text, and select Clear Transcript
Tabs.
To Get More Information about Errors and Warnings
- Select an error or warning message.
- Right-click the hyperlink, and select one of the following
commands:
- Search for Answer Record - Opens the Xilinx® Answers search page and lists Answer Records
related to the reported problem.
- Go to Source - Opens
the source file to the line of code that caused the error or warning.
This option is only available when the warning or error is caused
by the syntax in your HDL source file.
- Go to Translated Message - Opens a browser with the error or warning message displayed in Japanese.
To see this option, select Edit > Preferences, click ISE® General, and set the Message display language option to Japanese in the ISE General
page.
Note You can access these commands while programs are running.