New Project Wizard - Import EDIF/NGC Project Page

ISE

Use the Import EDIF/NGC Project page to select a top-level EDIF or NGC/NGO source file for this project. You can also select a constraints file to add to your project.

Select the Input File for the Project
- Input Design
  Enter the complete path or browse to the EDIF or NGC/NGO file to use as the input file for your project. A file must be specified here to continue using the New Project Wizard.
  Copy the input design to the project directory
  Copies the input design file into the project directory. If you deselect this option, you can keep the file in a remote directory. By default, this option is selected, and the file is copied into your project directory.
Select the Constraint File for the Project
- Constraint File
  Enter the complete path or browse to the User Constraints File (UCF) to associate with the EDIF or NGC/NGO file. Entering a file is optional.
  Note The constraint file is automatically associated with the EDIF file when both are specified in the New Project Wizard. Whenever a constraint file is added to a project that has only one source file (EDIF), it is automatically associated to that single source file.
  Copy the constraints file to the project directory
  Copies the constraints file into the project directory. If you deselect this option, you can keep the file in a remote directory. By default, the option is selected, and the file is copied into your project directory.