| 0016 |
September 2006 |
Serial Numbers > 580 (Released with ISE 9.1 SP1)
Notes: Improved ECP operation, increased TCK frequency to 10 MHz. (see Xilinx Answer Record 23923) |
| 0012 |
June 2006 |
Added filters to eliminate glitches from ‘noisy’ parallel ports |
| 0009 |
April 2005 |
Improved ability to connect in ECP mode with fast PC's. |
| 0008 |
March 2005 |
Fixed adapter over-current failures when running iMPACT batch
file commands in desktop programming mode. |
| 0006 |
Feburary 2004 |
1. Fixed intermittent verify failures.
2. Improved adapter power-up timing so that iMPACT does
not report the following:
 |
| 0005 |
May 2003 |
1. Added fast SelectMAP Verify.
2. Added host Over Current Detection on Adapter Port. |
| 0004 |
February 2003 |
1. Added LED annunciation of over-current
faults on
switched +5VDC to adapter port.
2. Added support for SelectMAP configuration.
Note: SelectMAP configuration will be supported in ISE 5.2i SP1. |
| 0003 |
December 2002 |
Initial Product Release
1. Supports JTAG / SS operations on Boundary Scan port.
2. Supports 18V00 and CoolRunner II device programming
on the adapter port. |
